·6 min read
NITKU in Coretax for Branches: How Multi-Location SMEs Register Every Outlet and Use the Right ID
If your business runs several outlets, warehouses or branch offices, each one needs its own NITKU in Coretax. This guide shows you how to register them, keep a simple master list and make sure staff use the right ID on every tax document.
- coretax
- nitku
- branch registration
- multi-outlet
- tax compliance
- master data
- pkp
- sme
If your business has more than one place of operation, such as three outlets, a warehouse and a small head office, Coretax expects each of those places to have its own ID. That ID is the NITKU, and getting NITKU in Coretax for branches right is one of the most common stumbling blocks for multi-location SMEs. Use the wrong NITKU and your faktur pajak can be rejected. Your bukti potong can also end up recorded against the wrong location, and your customers will start asking awkward questions. This guide explains what a NITKU is, how to register one for each location, and how to stop staff from mixing them up.
What a NITKU is and why each location needs one
NITKU stands for Nomor Identitas Tempat Kegiatan Usaha, the identity number for a place of business. It is 22 digits long: your 16-digit NPWP followed by a 6-digit location code.
- Head office: usually your NPWP followed by
000000. - Each additional location: the same NPWP with a different 6-digit code, assigned by the system when you register the location.
In the old system, branches often had their own 15-digit NPWP. Under the current rules, a company has one NPWP, and each branch, outlet, warehouse or factory is identified by its NITKU instead. If you had old branch NPWPs, Coretax should already have mapped them to NITKUs. It is still worth checking that the mapping is correct.
Why does this matter in practice? Coretax uses the NITKU to know where a transaction happened. When your Surabaya outlet sells to a corporate customer, the faktur should show the Surabaya NITKU, not the head office one. When your warehouse withholds PPh 23 on a trucking invoice, the bukti potong should show the warehouse NITKU. How your VAT is ultimately reported across locations depends on your setup, so confirm that with your tax consultant. Either way, the location ID on each document needs to be accurate.
How to register NITKU in Coretax for branches, step by step
Registration is free and can be done online. Plan for roughly 30 to 60 minutes per location the first time, mostly spent gathering documents. DJP updates Coretax regularly, so menu names may shift slightly, but the flow looks like this:
- Log in as the company. The person in charge (PIC) logs in with their own account, then switches to act on behalf of the company.
- Open the data change menu. Go to Portal Saya and choose the option to change taxpayer data (Perubahan Data).
- Add a place of business. In the section for places of business or sub-units (Tempat Kegiatan Usaha), add a new entry. Enter the full address, the type of location (outlet, warehouse, branch office and so on) and the business activity carried out there.
- Submit and sign. Submit the change and sign it electronically.
- Check the result. Once processed, the new location appears in your taxpayer profile with its own 22-digit NITKU. Copy it exactly from the screen. Do not retype it from memory.
What counts as a separate location?
Any fixed place where you actually do business: a shop, a café, a warehouse, a production site, a branch office. A storage cupboard at a supplier's premises usually does not count. A rented warehouse where your staff receive and ship goods usually does. When in doubt, ask your tax consultant before opening the location, not after.
Opening and closing locations
Register a new location as soon as it starts operating. When you close an outlet, use the same data change menu to deactivate it. A closed outlet that is still active in Coretax is an open invitation for a cashier or admin to keep selecting it by mistake.
Keep a simple master list of your locations
The single most useful thing you can do is keep one master list of locations. A shared spreadsheet is enough for most SMEs. Every person who issues faktur, prepares bukti potong or sets up your accounting software should use it as the only source of truth.
Suggested columns:
- Internal location code (for example
OUT-SBY-01) - Location name as staff know it (for example "Outlet Tunjungan")
- Full address exactly as registered in Coretax
- NITKU, all 22 digits
- Type: outlet, warehouse, office, factory
- Status: active or closed, with the date
- Person responsible at that location
- Code used for this location in your POS or accounting system
Restrict who can edit the list, ideally to one finance person. Everyone else should have view access only. Once a month, compare the list with the locations shown in your Coretax profile. If they don't match, fix it that day.
Using the right NITKU on faktur, bukti potong and payments
Faktur pajak
When you create a faktur in Coretax, you choose the seller location from the locations registered under your NPWP. You also enter the buyer's ID TKU. Two habits prevent most rejections:
- Seller side: pick the location that actually made the sale, using your master list. If you upload faktur in bulk from accounting software, map each POS or branch code to its NITKU in the import template, so nobody has to choose by hand.
- Buyer side: ask business customers for their NITKU when you set them up as a customer, and save it in your customer master data. Large customers often have several locations too, and they will want the faktur addressed to the right one.
Bukti potong
When you withhold tax, for example PPh 23 on services or PPh 21 for staff, the bukti potong records the withholder's location and the recipient's ID. If your warehouse in Cikarang hires the contractor, use the Cikarang NITKU. Payroll that is run centrally can use the head office NITKU, provided that matches how you have set things up with your consultant.
Payments
Tax payments go to the company's NPWP through a billing code. The common mistakes here are not about NITKU digits. They are creating billing from someone's personal account instead of the company's, or choosing the wrong tax type or period. Whenever a form asks for location details, take them from the master list.
Common mistakes and how to avoid them
- Using the head office NITKU for everything. It feels simpler, but it misstates where transactions happened. Set the default per user or per POS terminal instead.
- Typos in 22 digits. Copy and paste from the master list. Never type a NITKU manually.
- Still using old 15-digit branch NPWPs. Update your invoice templates, accounting software and customer records.
- Missing buyer NITKU. Make it a required field when you create a new business customer.
- Closed locations still active. Deactivate them in Coretax and mark them closed in your list on the same day.
Fixing these takes a few hours of setup. Cleaning up rejected or misattributed documents later often takes days, and can mean replacement faktur and unhappy customers.
Your next step
This week, open your Coretax profile and list every location it shows. Compare that with the places where you actually operate. Register anything missing, close anything that's gone, and build your master list from the result. If your POS or accounting system needs to be mapped to NITKUs so faktur and bukti potong come out right automatically, CodeWorks can help you set that up. Get in touch and tell us how many locations you run.